简体中文 丨 ENGLISH
13562324658
Simplified Chinese 丨 ENGLISH
Home
Profile
Products
News
Honor
Service
Messages
Contact
Industry Trends
Company News
18
2014
/
05
Shipping Records
The WuDi ShengWei mattress and reed board machine (tatami machine) is a new type of machinery independently researched and developed, which has realized computerized automated operation. This machinery features reasonable structural design, appropriate power matching, high production efficiency, low production cost, high degree of automation, complete supporting facilities, simple and easy-to-understand operation, and convenient use and maintenance.
02
03
Safe operation, maintenance, and upkeep
First: Inspect the machine for damage, the firmness of the components, and whether the screws are loose. Check the mating surfaces of the various guides for any damage or other abnormalities. Second: The raw materials in the feed hopper should be evenly and fully spread; the line materials should be threaded correctly and without omission. When adding materials, strictly prohibit mixing non-raw materials such as wood and metal. Third: Check whether the wiring in the distribution box and the various output lines are connected properly, whether the control buttons and various limit switches are sensitive and reliable, and whether there is any leakage.
Common malfunctions and troubleshooting methods for reed plate machines
Motor does not rotate or makes a buzzing sound. Reason: No power, phase missing, wire disconnected, fuse blown. Troubleshooting: Check power supply and wiring, replace fuse. Mechanical parts not moving. Reason: Travel switch, limit switch, or wiring damaged or disconnected. Troubleshooting: Check, adjust, and replace. Reed plate heavy needle. Reason: Too much reed grass laid, excessive weaving pressure. Troubleshooting: Reduce reed grass or raise needle beam, reduce weaving pressure and appropriately increase traction pressure.
28
General view of machine installation and working appearance
The above figure confirms the length of the location, taking into consideration the placement of raw materials (reeds and reed boards), and the workspace is set up as follows: Note: 1: The foundation of the mechanical installation location should remain balanced. (Figure 1) 2: The pit entrance is located under the distribution box in front of the reed board machine for convenient operation. (Figure 2) 3: Per meter 4: The feed hopper and reed board machine are placed centrally aligned.
15
2011
01
English ISO9000 certification